24VDC constant current LED tape 3000K 9.6W/m 120LED/m 10m IP20 SMD3528

24VDC constant current LED tape, 3000K, 9.6W/m, 120LED/m, 10m (96W, 1200 LED), IP20, SMD3528

Temperature Sensor Constant Current LED Strip from PREMIUM range.
Constant current version: with stable current, suitable for high-quality requirements projects.
With constant current IC for each segment: NO need of constant current driver.
DC24V input: can work with any DC24V PWM control system or dimmer, such as RF, 0-10V, DALI, DMX512, etc.
It can work with unstable power supply and without damage. 
With a temperature sensor: it can lower the current to protect itself when the temperature is too high.
Brightness uniform: with the same brightness from the first end to the last end
DC24V version: can work with DC21V to DC30V input (the same current)
The voltage drop will not affect the brightness uniform of LED strips (DC21V-DC30V input)
The constant current LED strip is cuttable like the constant voltage LED strip 

LED: CRI≥80 SMD3528
Input voltage: 24VDC
Type of LED power supply/driver: constant voltage (not included)
Quantity/m: 120 LEDs per meter
Power: 9.6W/m
CCT: 3000K
Brightness: approx. 840lm/m
Beam angle: 120degree
CRI(Ra)≥80
Total length (roll): 10m 96W, 600LEDs)
Degree of protection: IP20 (non-waterproof)
PCB: 10mm wide white PCB
Inst.: 10mm wide self-adhesive 3M tape backing
Cutting points: at 6 LED (50mm) intervals
Connections: with approx. 200mm connection wires at both ends
Operation temperature: -20℃-+45℃
Warranty: 3 years
Dimming: yes (0-10V/1-10V/DMX/DALI/Triac)

Adopt a suitable power supply to match the LED strips. The power of LED power supply should be 20% bigger than the max power of LED strips in order to ensure the long-time performance of power supply.