LCC9 driver & dimmer for constant current, voltage LED light, Vadsbo
LCC9 combined LED driver and LED dimmer in one device for constant current and constant voltage LEDs. Push button control or 1-10V. Load up to 9W
You can order online 24/7, all ordered goods will be dispatched as soon as possible and we will notify you via e-mail. For custom made orders please contact us.
Orders over £500 (excl. VAT) Standard and Next Day service apply to UK mainland and Northern Ireland only. All orders will be sent by a trackable method.
You have the right to cancel your online website order within 14 calendar working days of ordering, or 14 calendar days of receipt of the goods (whichever is the longer).
LED control gear LCC9 (combined LED dimmer and LED driver in one module) for LED light fixtures and wall boxes. Load up to 9W
A big step for the installation technology within the field of driving and dimming of LEDs
- Made in wall box shape.
- Suitable for constant current and constant voltage loads.
- Load up to 9W.
- Dimming: push button retractive/momentary switch, 1-10V
Input voltage 220-240VAC (screw terminal).
Designed to fit in a wall box up to two units (2x9W) or LED fixture
Primary side control: retractive switch
Secondary side control: 1-10VDC; retractive switch or potentiometer.
Dimensions (DxH): dia. 57mm x 22mm
Housing: thermoplastic, grey colour
Max. ambient temperature: +50ºC
Weight: 53g
Connection wires: 1.5mm²
Automatic sensing of which type of control is active - retractive switch, 1-10VDC signal or potentiometer on the secondary side.
It is thus possible (on the same unit) to have a retractive switch connected simultaneously on both primary and secondary side. LCC9 automatically detects which control is active. Works also by parallel connection of one or more retractive switches.
Soft start
Memory function
Constant voltage protection
Overload protection
Over temperature protection
Possible cascade connection of LCC9 to dim loads with higher power than 9W.
DIP-switch: it can set the type of LED you want to dim and which unit will act as master unit when cascading.
Selectable constant currents: 350mA, 500mA, 700mA
Selectable constant voltages: 6VDC, 9VDC, 12VDC, 24VDC
Standards: EN55015; EN61547; EN61347-1; EN61347-2-13; EN61000-3-2; EN61000-3-3
Insulation class II IP20
Approval: CE/SGS
If you choose retractive switch/es to control LCC9, the retractive switches are recommended as follow: Function: On / Off - A short press. The LED control gear will start with the last used light level (memory function) Dimming up / down - Keep the button pressed until the desired level is reached.
4 other products in the same category: