DALI, DMX, LCC60MCM driver/dimmer for LED lights, Vadsbo
LCC60MCM combined LED driver and LED dimmer in one device for constant current and constant voltage LEDs. Push button control or 1-10V. Load up to 2 x 30W.
You can order online 24/7, all ordered goods will be dispatched as soon as possible and we will notify you via e-mail. For custom made orders please contact us.
Orders over £500 (excl. VAT) Standard and Next Day service apply to UK mainland and Northern Ireland only. All orders will be sent by a trackable method.
You have the right to cancel your online website order within 14 calendar working days of ordering, or 14 calendar days of receipt of the goods (whichever is the longer).
DALI, DMX, LCC60MCM driver/dimmer for LED lights. Load up to 2 x 30W
- LED control gear LCC60MCM (a combination of LED-driver and LED-dimmer in one device).
- Suitable for constant current and constant voltage loads.
- Load up to 2 x 30W (see table).
- Dimming: push button retractive/momentary switch, 1-10V, DALI, DMX
Input voltage 220-240VAC (screw terminal)
Two outputs
Single output offers as follow:
a) Constant current
350mA (2-57V) 1-20W (1-16 st LED)
500mA (2-54V) 2-27W (1-15 st LED)
700mA (2-43V) 3-30W (1-12 st LED)
900mA (2-27V) 4-24 W (1-7 st LED)
b) Constant voltage: 12Vdc (max 10.8W) / 24Vdc (max 21.5W)
Dimming control:
- Primary side: push-button retractive/momentary switches, DALI, DMX
- Secondary side: 1-10Vdc controller
Quick-connection terminals for easy connection
Easy to install in suspended ceiling thanks its small dimensions (easy entrance into a 75-80mm hole)
Dimensions (LxWxH): 220x58x40mm
Holes for mounting screws to wall or similar surface
Max. ambient temperature: +50ºC
Weight: 250g
Housing: thermoplastic, white
Connection wires: 1.5mm²
Dimming: push-button retractive switch or potentiometer (1-10VDC, I=0.35mA)
Synchronization without sync cable
Max. cable lengths (primary side): 15meters between the first driver and push button; 15meters between drivers
Max. cable lengths (secondary side): 20meters to the luminaries; 40 meters in a loop
Mixed loads possible
Soft start
Memory function
Constant voltage protection
Overload protection
Over temperature protection
Approved for mounting on furniture
DIP-switch: using the DIP switch can set the type of LED you want to dim
Selectable constant currents: 350mA, 500mA, 700mA, 900mA
Selectable constant voltages: 12VDC, 24VDC
Standards: EN55015; EN61547; EN61347-1; EN61347-2-13
Insulation class II
IP20
Approval: S/CE
EMC
LCC60MCM can be used in a system for driving and dimming of both LED strips and LED lamps in the same time.
4 other products in the same category:
Customers who bought this product also bought: