EcoDim-Triac Mains Dimmer Module (on/off, rotary)

EcoDim-Triac Mains Dimmer Module (on/off, rotary)
Input voltage: 220-240VAC

Product features:
- Push on, push off, rotary dimming control switch.
- Triac leading edge phase control
- For use with resistive and inductive loads
- Designed for the ELED- range of 12 watt to 360 watt Mains Dimmable drivers
- Will work with Mean Well PCD series
- Will work with other Leading Edge Dimmable drivers
- Smooth dimming operation from 0-100% light output
- Suitable for use with 1 or 2-way lighting circuits
- Module case ultrasonically sealed to reduce buzzing
- Integrated trimming potentiometer allowing CFL and LED lamps/drivers to be set at a minimum level to prevent them going out or flickering at the bottom of the dimmer range.
- Fits a plaster depth (25mm) mounting box
- Can be fitted to most dimmer plates

Important user information
- Min. load 0W (dim 0-100%, dimming performance depends on co-operation with LED lamps, power supply or transformer)
- Max. load 400W
- De-rate dimmer by 70% for LED Loads.
- Do not mix lamp types and wattages on the same lighting circuit.
- Before switching off the lamps turn the dimmer switch to maximum, this will ensure that the lamps are at the correct voltage when next switched on.
- Always wait for lamps to reach full brightness before setting the dimming level.
- Module only – Faceplate not included.

- Dimensions (H x W x D): 62.2 x 26 x 46.2mm